Address
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Phone:
0086-20-8938 9313
0086-757-8938 9313
Email:
Work Hours
Monday to Friday: 8AM - 10PM
24x7 online service
Custom LED Light Box & SEG Display Manufacturer
Custom portable booth stand counters for reception, product presentation, lead capture and branded front-desk use at exhibitions and events.

A booth counter gives staff a defined reception or demonstration point while adding another branded surface to the booth. Buyers should confirm countertop use, storage need, graphic method, packed size and stability.
| Buyer decision | What to confirm |
|---|---|
| Countertop | Intended load and working surface requirement |
| Storage | Open or enclosed internal space if required |
| Graphic | Wrap, tension graphic or panel method for the quoted model |
| Transport | Knock-down structure, case/carton and packed size |
| Integration | Height and visual relationship to the main booth system |
Portable counters need enough stability for normal event use while still breaking down for transport. The frame, countertop and graphic surface should be quoted as one working assembly.
The counter graphic often carries the logo at close viewing distance, so artwork scale and alignment matter. Confirm the printable area and whether replacement wraps/graphics can be ordered separately.
The buyer should know how the base, top and graphic connect and whether the unit requires tools. If the counter doubles as a transport case in a particular configuration, that should be stated in the quotation rather than assumed.
Countertops and corners are vulnerable to impact. Packing should separate rigid surfaces from metal hardware and keep fasteners/accessories with the correct counter.
Approve countertop length, working height and usable staff clearance. A front-elevation image cannot show all rear supports or aisle/working-space constraints. Ask for overall finished W×H×D and any service clearance required by this portable branded reception counter.
Confirm the complete frame, counter hinges, shelf and fasteners, graphic support and surface finish against the project drawing. Material descriptions should be specific to the quoted model, not automatically inherited from another exhibition product family.
Define one-sided or two-sided use, camera/visitor approach directions and the orientation of any back face. A two-sided request may change the support, graphic and packaging configuration.
Use the counter graphic/wrap with safe corner margins and record final print size, bleed, protected area, attachment method and print-revision code. Printing cannot be finalized correctly from a nominal booth width alone.
Document how to join counter support, tabletop and branded wrap. An installation sheet should name every frame section, show graphic order and note which operation, if any, requires tools or two installers. Do not advertise an untested universal setup time.
Before the event verify venue traffic and countertop load, installation labor rules, power/cable requirements if fitted and permissible attachment methods. “Portable” does not automatically mean every venue allows self-installation.
List counter hinges, shelf and fasteners, graphics, carry case and fasteners separately. Ask for part identifiers and an acceptable spare kit for important multi-event programs; keep the approved component revision with the packing list.
Inspect countertop rigidity and stability under agreed use, finished dimensions, hardware completeness, frame surfaces, printed graphics and assembly fit. If any illuminated accessories are ordered, inspect electrical functions against the model quotation.
For a portable branded reception counter, request the packed size, actual gross weight, case count and protection of the frame/graphic system. Event material handling and freight should be budgeted separately where relevant.
Plan repeated setup and storage between events. Number parts, store graphic templates and report damaged components after each event. Keep an updated inventory so that a missing connector or replacement graphic does not force unnecessary re-purchase of an entire display.
| RFQ Item | Specify |
|---|---|
| Product | Booth Stand Counter |
| Installed dimensions | countertop length, working height and usable staff clearance |
| Graphic | counter graphic/wrap with safe corner margins |
| Assembly | join counter support, tabletop and branded wrap |
| Hardware / spares | counter hinges, shelf and fasteners |
| Site conditions | venue traffic and countertop load |
| Inspection | countertop rigidity and stability under agreed use |
| Order | Quantity, destination, artwork readiness, packing and deadline |
We position counters as functional booth components, not decorative add-ons. The quotation should make the countertop, graphic area, storage, assembly and packing clear.
Selected designs can be reviewed with internal storage or shelving requirements.
Yes, where the selected counter uses replaceable wraps or fabric graphics.
Yes. Use the same approved brand artwork and color references across the booth system.
Related: Tradeshow Display Manufacturer · Quality Control · Warehouse & Logistics
Compare the formats that buyers usually shortlist for the same project.
Send the display type, visible size, quantity and destination. We will reply within 2 hours. If your project is confidential, tell us at first contact and we will keep it under NDA.