Address
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Phone:
0086-20-8938 9313
0086-757-8938 9313
Email:
Work Hours
Monday to Friday: 8AM - 10PM
24x7 online service
Custom LED Light Box & SEG Display Manufacturer
Custom straight-design tradeshow display systems for exhibitors that need a clean linear backwall, predictable booth footprint and easy alignment with counters, shelves or adjacent modules.

A straight-design tradeshow display uses a flat frame geometry to create a clean backwall or branded surface. It is often selected when the booth needs maximum usable wall width, simple alignment and a straightforward graphic template.
| Buyer decision | What to confirm |
|---|---|
| Finished width | Overall wall width and available booth footprint |
| Frame depth | Required stability, graphic system and any lighting integration |
| Graphic sides | Single or double-sided requirement |
| Alignment | How multiple sections meet without visible gaps |
| Packing | Section length, bag/case and freight limits |
Straight frames are easier to align with booth boundaries, counters and product fixtures, but buyers still need to confirm how long spans are divided for transport and how the sections connect on site.
A flat wall makes artwork alignment especially visible. Keep the approved template, safe area and final output dimensions tied to the exact frame revision so replacement graphics remain predictable.
The installation sequence should identify frame sections, feet/base parts and graphic orientation. For wider systems, numbering sections can reduce time spent matching components on the show floor.
Long straight profiles may need sectional construction to meet courier or air-freight limits. Request packed dimensions before approving the design if logistics cost matters.
Approve straight wall width, height and rear base footprint. A front-elevation image cannot show all rear supports or aisle/working-space constraints. Ask for overall finished W×H×D and any service clearance required by this flat linear exhibition backwall.
Confirm the complete frame, straight profile connectors and base feet, graphic support and surface finish against the project drawing. Material descriptions should be specific to the quoted model, not automatically inherited from another exhibition product family.
Define one-sided or two-sided use, camera/visitor approach directions and the orientation of any back face. A two-sided request may change the support, graphic and packaging configuration.
Use the flat tension fabric graphic aligned at frame joints and record final print size, bleed, protected area, attachment method and print-revision code. Printing cannot be finalized correctly from a nominal booth width alone.
Document how to join numbered straight sections and orient feet. An installation sheet should name every frame section, show graphic order and note which operation, if any, requires tools or two installers. Do not advertise an untested universal setup time.
Before the event verify height limits and foot clearance along booth edge, installation labor rules, power/cable requirements if fitted and permissible attachment methods. “Portable” does not automatically mean every venue allows self-installation.
List straight profile connectors and base feet, graphics, carry case and fasteners separately. Ask for part identifiers and an acceptable spare kit for important multi-event programs; keep the approved component revision with the packing list.
Inspect joint alignment, graphic edges and printed seam appearance, finished dimensions, hardware completeness, frame surfaces, printed graphics and assembly fit. If any illuminated accessories are ordered, inspect electrical functions against the model quotation.
For a flat linear exhibition backwall, request the packed size, actual gross weight, case count and protection of the frame/graphic system. Event material handling and freight should be budgeted separately where relevant.
Plan linear backwall systems reused with new graphics. Number parts, store graphic templates and report damaged components after each event. Keep an updated inventory so that a missing connector or replacement graphic does not force unnecessary re-purchase of an entire display.
| RFQ Item | Specify |
|---|---|
| Product | Straight Trade Show Display |
| Installed dimensions | straight wall width, height and rear base footprint |
| Graphic | flat tension fabric graphic aligned at frame joints |
| Assembly | join numbered straight sections and orient feet |
| Hardware / spares | straight profile connectors and base feet |
| Site conditions | height limits and foot clearance along booth edge |
| Inspection | joint alignment, graphic edges and printed seam appearance |
| Order | Quantity, destination, artwork readiness, packing and deadline |
We treat straight walls as repeatable exhibition modules. Frame sectioning, graphic fit, booth alignment and packing are defined together rather than after the design is already approved.
Yes, subject to the frame system and transport plan.
Selected systems can be reviewed for double-sided graphics when both viewing directions matter.
Lighting can be reviewed according to the selected structure, electrical requirement and venue rules.
Related: Tradeshow Display Manufacturer · Quality Control · Warehouse & Logistics
Compare the formats that buyers usually shortlist for the same project.
Send the display type, visible size, quantity and destination. We will reply within 2 hours. If your project is confidential, tell us at first contact and we will keep it under NDA.