Address
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Phone:
0086-20-8938 9313
0086-757-8938 9313
Email:
Work Hours
Monday to Friday: 8AM - 10PM
24x7 online service
Custom LED Light Box & SEG Display Manufacturer


A restaurant chain can replace one poster in five minutes and still spend days on a nationwide menu change. The key variables are safe access, consistent visible dimensions, correct graphic orientation and how each store receives its revised print. This is a buyer workflow for repeat updates, not simply a comparison of frames.
Stores may share a brand identity but not the same hardware generation. Audit installed frames by outer size, visible opening, access method and exact template code before ordering one nationwide print batch.
A front-opening design can usually simplify service, but proximity to a counter, ceiling or another fixture may block access. Ask for a video of the actual graphic change at the mounting height.
Menu text is not decorative filler. Put prices, mandatory notices and offer conditions inside the template’s approved safe zone and verify the cropped result on a physical sample.
Some locations can update posters using trained staff; others require contractors or mall approval. Separate printed graphic handling from any electrical servicing, which should remain with qualified people.
A snap-frame protective face may scratch or attract fingerprints during frequent opening. Check the replacement procedure, cleaning method and whether spare protective covers are obtainable.
A wall-hung LED frame may open at the front yet require a separate route to the driver. Keep electrical service instructions outside the menu-change SOP to prevent unsafe shortcuts.
Include store ID, location, revision, menu variant and quantity on each graphic pack. The warehouse should not have to open sealed prints to identify which store receives the breakfast menu.
Specify cut size, material, artwork orientation and acceptable visible crop. If the supplier and buyer use different measurement conventions, an agreed physical print sample becomes essential.
Every print should have an artwork version and approval date. A store receiving an obsolete menu despite a correctly manufactured frame is a logistics problem, so build version control into the shipment plan.
Pilot in a busy location where the frame is near a counter, high wall or fixture. This exposes real access problems better than testing a free-standing sample in a warehouse.
New artwork colors can look different when backlit. Ask for a sample illuminated in the quoted hardware to check contrast, fine text and potential washed-out regions before printing hundreds of copies.
Store frame ID, template, print substrate and file name in one register. New menu revisions can then be quoted accurately without reverse-engineering a photo every season.
Define how the menu graphic loads: snap-opening perimeter, magnetic face or SEG silicone edge. These access styles require different visible-area allowances, print substrates and staff handling; the menu-board description alone is insufficient.
Not every application justifies the same hardware or specification. If menu pricing changes digitally every day, a printed replaceable poster system might be inappropriate. Record this alternative in the selection report and be prepared to reject the more elaborate quotation if it does not solve a real operating problem. A useful vendor will explain trade-offs rather than insisting its most expensive option is always appropriate.
Have a store employee change a complete menu set on a sample without removing the wall assembly. Time opening, graphic placement, closing and final alignment; note if the lens can be scratched or shifted.
Before approving a quantity order, ask for: visible-area template, mounted graphic-change video, tested print sample and store-label plan. Request a revision or date on each file and confirm that the evidence represents the exact product and configuration in the quotation. If the supplier answers with a photo of a different SKU, keep the item open rather than guessing equivalence.
Give each restaurant a versioned artwork template and photo sequence for replacements, plus a clear rule for handling electrical issues. A graphic change should not require staff to approach live wiring.
Ship artwork in store-numbered sets with revision and orientation arrows. Pack frames and graphic replacements separately so a missing A3 promotional sheet does not delay the hardware installation.
Illustrative rollout: Forty cafés use the same nominal A2 poster but two frame generations have different covered edges. Printing one common file for all sites produces cropped prices. The fix is a frame-specific template register before print approval. This is an illustrative planning exercise, not a reported BrandMate customer case. The purpose is to uncover a design, access or handoff issue while there is still time to change a sample. The final acceptance exercise should be approved by the purchaser and documented with photographs and notes.
Compare labor across all 200 menu changes. A more expensive access mechanism can be justified if it reduces repeated staff handling or errors; test that outcome rather than relying on ‘easy change’ copy.
What size should the restaurant send for replacements? Provide the actual printed insert, visible opening and overall frame dimensions separately. A menu labelled A3 may still use a frame with a different crop or access system.
Can staff change 200 menus with the lights on? Graphic access and electrical servicing are different tasks. Obtain the approved safe graphic-change instructions; any electrical opening belongs to qualified service personnel.
To request a manufacturer review, send the current application, proposed quantity and destination, target date, and the model-specific drawings, samples or test evidence described above. Include the unanswered technical questions in the RFQ; we will confirm what is feasible for the proposed configuration rather than presenting unverified performance as a guarantee.
Reference notes: EXHIBITOR: large-format printing technologies ISTA transport simulation procedures. These sources support general principles only; they do not certify or establish the specifications of BrandMate products.
Review the current manufacturer product range for available configurations, and our quality-control process before preparing an RFQ. Confirm product availability and this category link on the live website before publishing.