Address
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Phone:
0086-20-8938 9313
0086-757-8938 9313
Email:
Work Hours
Monday to Friday: 8AM - 10PM
24x7 online service
Custom LED Light Box & SEG Display Manufacturer


An exhibition counter can look flawless in a supplier photo and still fail the job when a heavy demo unit, visitor contact or repeated assembly changes the real load. Instead of trusting a vague “strong construction” claim, buyers should specify where the counter is loaded, how it is supported and what a production-equivalent sample must demonstrate. This checklist avoids inventing a load rating for BrandMate products.
List brochures, a coffee machine, display products, tablets or demonstration hardware separately. For each, provide mass, footprint, attachment method and whether a presenter presses or leans on the top. A nominal weight without its location is not a useful design input.
Many portable trade-show counters are designed for promotional use, not for industrial equipment or human support. Confirm the intended use with the supplier. Never infer that a foldable exhibition surface can support a person or heavy test machine.
A distributed load across a top panel differs from a small object positioned near a corner. Specify the object footprint, expected duration and whether the top must remain level. Request an engineering assessment for unusual or safety-critical use.
The words “MDF,” “composite” or “aluminum” are insufficient without model-specific thickness, panel support and joining details. Ask for a cross-section and parts list identifying load-bearing members, edge treatment and attachment points.
A countertop may remain flat while the entire counter tips under an off-center push. Provide floor type, aisle traffic and whether guests can touch the front edge. Ask for a representative tip-resistance check appropriate to the installation.
If a mobile counter has wheels, confirm braking arrangement, wheel loads and whether they are meant to roll while equipment remains on top. A wheeled showroom sample does not show the same stability as a counter standing on fixed feet.
Branded wrap panels and SEG graphics must not hide fasteners or service points that require inspection. Confirm how print faces attach and whether changing a graphic alters base stability or access to the frame.
Two counters with the same visible footprint may use different frames. Require the exact external dimensions and internal support drawing for the selected SKU; published dimensions from another range do not establish a load limit.
Will a presenter open a laptop, move a sample, apply hand pressure or connect a power lead during the show? Describe those motions because a static photograph does not reveal the effects of repeated customer interactions.
Have the intended installer build the production-equivalent sample using only the supplied instructions and tools. Record missing parts, misaligned joints, locking steps and how the top is secured before any load is applied.
The acceptance setup should replicate top panel, graphic wrap, internal shelves, support legs and any wheels. Agree a safe sample procedure and objective criterion with a competent technical reviewer; do not copy a competitor’s advertised number.
A brief pass under weight may conceal permanent flexing, loosened connectors or rocking. Photograph the sample before and after the agreed test and document visible deformation or assembly defects.
The RFQ should include counter size, intended items and weights, load footprint, sample test expectation, number of units, show venue, packing requirement and delivery date. Leave uncertain values open for supplier confirmation rather than inventing them.
Ask the supplier to identify which top support, vertical members and base components carry the intended load. Changes to panel material or fastening after sample approval may require a new check.
A graphics panel should come off without damaging the structural joints. Have an installer demonstrate the replacement process and confirm the counter remains stable before and after repeated handling.
If the exhibit uses powered equipment, specify where local power is supplied, routed and safely isolated. An illuminated graphic or powered accessory may need a separate electrical assessment; do not improvise live-wiring changes during the show.
A crowded booth may place bags near the base, visitors against the front and an operator behind the counter. Discuss clearance and stability with the venue and installer, not simply with a manufacturer selling a standalone product.
Record top panel, joints, braces, base/feet, printed graphics and hardware bags by part number. A missing cross brace at the exhibition hall should be treated as an incomplete and possibly unfit kit, not as a cosmetic issue.
At destination, inspect damaged corners, missing fasteners, distorted support bars and packing condition. Confirm all components match the approved sample drawing before the counter is built for public use.
A cheaper price without its base feet, internal bracing, transport case or fitting instructions can be misleading. Compare offered assembly, accepted load method, spare parts, installation labor and replacement rights on the same quotation sheet.
Can a portable exhibit counter hold a person? Do not assume so. A promotional counter is not a work platform unless its manufacturer has specifically rated and documented that use.
Does a 50 kg load apply anywhere on the countertop? A single mass number is not meaningful without load footprint and location, support structure and test method. The buyer should agree the exact representative sample trial.
To request a manufacturer review, send the current application, proposed quantity and destination, target date, and the model-specific drawings, samples or test evidence described above. Include the unanswered technical questions in the RFQ; we will confirm what is feasible for the proposed configuration rather than presenting unverified performance as a guarantee.
Related manufacturer information: Booth Stand Counter; Quality Control; Warehouse & Logistics. Confirm current product permalink before publication.
All numerical load limits and stability criteria must be approved for the offered configuration. No BrandMate model-wide limit is asserted here.