Address
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Phone:
0086-20-8938 9313
0086-757-8938 9313
Email:
Work Hours
Monday to Friday: 8AM - 10PM
24x7 online service
Custom LED Light Box & SEG Display Manufacturer
Custom backdrop displays for trade shows, media walls, conferences, launches and branded photo areas, with project-based frame shape, graphic method and transport planning.

A backdrop display creates a large branded visual surface behind a booth, stage, interview area or photo zone. The key sourcing questions are finished size, straight or curved geometry, graphic tension, stability, camera/viewing distance and packing.
| Buyer decision | What to confirm |
|---|---|
| Visible area | Finished display size and usable graphic area |
| Shape | Straight, curved or project-specific profile |
| Graphic finish | Seams, edge/zip attachment and replacement requirement |
| Stability | Feet/base, location and traffic conditions |
| Transport | Section length, bag/case and packed dimensions |
Backdrop hardware should be selected around the required visual width and transport limit. Large displays may need sectional frames so the hardware can fit into cases or cartons without compromising the installed shape.
The graphic should be specified together with the frame. Confirm the artwork template, bleed/safe area, attachment method and whether the buyer needs single-sided, double-sided or replacement graphics.
For media walls and stage backdrops, alignment matters. Confirm how sections connect, how the graphic is tensioned and how the feet/base are positioned so the installed wall presents a clean face to cameras and visitors.
Graphics should be protected from dirt and sharp hardware. Frame sections, feet and accessories should be identified so the installation team can assemble the backdrop without sorting mixed parts on site.
Do not order portable branded backdrop from a front elevation alone. Provide backwall width, height and available rear clearance, traffic clearance, maximum height and the parts that project beyond the printed graphic. Compare these dimensions with the actual booth plan.
The complete structure includes the frame, support, connectors and graphics. For a backdrop display project, define the frame/feet orientation and graphic tensioning, accessory quantities and whether components are interchangeable across units. Keep a version-controlled component list.
Confirm who views the installation from each direction. A single-sided layout may use a different graphic attachment or back finish from a double-sided layout. If both sides carry artwork, issue a face-labelled print schedule.
Agree the tension graphic with seams and edge attachment, finished visible area, seam and safe margins before printing. Store the approved artwork revision with its exact hardware model so the next campaign does not receive a mismatched replacement print.
Ask for a model-specific illustrated instruction starting with inventory, followed by frame/feet orientation and graphic tensioning, graphic installation and a final stability/appearance check. Setup time should only be quoted when the crew size and tools are stated.
Review whether stage or media-wall access restricts the base. “Tool-free” may apply to frame assembly but not necessarily to all hardware, lighting or venue work. Confirm local venue rules, rigging/electrical restrictions and safe access before sending staff to the event.
Identify feet, crossbars and tension connectors. Keep a spare-part list, quantities and packaging labels, especially for recurring events. A replacement graphic or connector should reference the actual frame revision rather than a generic product name.
Inspect frame dimensions, joins and frame/feet orientation and graphic tensioning, graphic fit, surface condition, all accessories, packed count and the available installation instructions. If electrical accessories are specified, perform power-on checks separately from mechanical assembly.
Choose protective sectional frame lengths and graphic protection. Request packed length, width, height, gross weight, case count and freight handling constraints. Never infer shipping cost from the installed size or assume a carrying bag is suitable for repeated courier handling.
For press events and reusable booth backdrops, label every unit and printed graphic, preserve the folding/assembly instructions, dry and clean components according to their materials, and inspect connectors after each teardown. Maintain a replacement/repair record rather than repeatedly buying an entire kit.
| RFQ Field | Specify |
|---|---|
| Display format | Backdrop Display and project drawing |
| Size and configuration | backwall width, height and available rear clearance |
| Graphics | tension graphic with seams and edge attachment |
| Assembly | frame/feet orientation and graphic tensioning |
| Accessories / spares | feet, crossbars and tension connectors |
| Event | whether stage or media-wall access restricts the base |
| Logistics | sectional frame lengths and graphic protection |
| Commercial | Quantity, destination, artwork, deadline and repeat-use requirement |
We treat backdrops as visual surfaces with an installation and transport requirement, not just as printed graphics. That means confirming the frame, graphic fit, base and packing together.
Yes, depending on the selected frame system and project requirement.
Yes, keep the approved template and frame reference so replacement graphics can be matched to the existing hardware.
Finished width/height, quantity, shape, single/double-sided requirement, destination, artwork status and deadline.
Related: Tradeshow Display Manufacturer · Quality Control · Warehouse & Logistics
Compare the formats that buyers usually shortlist for the same project.
Send the display type, visible size, quantity and destination. We will reply within 2 hours. If your project is confidential, tell us at first contact and we will keep it under NDA.